Cisco SPA100 Series Provisioning Guide

7
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Router Configuration Parameters
This chapter provides descriptions and examples of the parameters in the <router-
configuration> section of the config.xml file for Cisco SPA100 ATAs.
See these topics:
• Nested Structure, page 147
• <WAN_Interface> WAN Interface Parameters, page 149
• <PHY_Port_Setting> Parameters, page 155
• <MAC_Address_Clone> Parameters, page 157
• <Internet_Option> Parameters, page 158
• <DHCP_Server_Pool> Parameters, page 160
• <WAN_VLAN_Setting> Parameters, page 167
• <CLDP_Setting> Parameters, page 168
• <SNMP> Parameters, page 170
• <Time_Setup> Parameters, page 176
• <QoS_Bandwidth_Control> Parameters, page 179
• <Software_DMZ> Parameters, page 180
• <Bonjour_Enable>, page 182
• <Reset_Button_Enable>, page 183
• <Router_Mode>, page 184
• <VPN_Passthrough>, page 185
• <Web_Management>, page 187
• <TR_069> Parameters, page 191
• <Log_Configuration> Parameters, page 195

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English