Cisco SPA100 Series Provisioning Guide

Router Configuration Parameters
<Log_Configuration> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 195
7
<Log_Configuration> Parameters
This section describes the parameters in the <Log_Configuration> section of the
config.xml file.
NOTE In addition to the descriptions, also refer to <Log_Configuration> Example:
Logging Critical Kernel Events and Info System Events to Viewer, Email, and a
Syslog Server, page 202.
Parameter Details
<Status> Description: Enables or disables logging
User Interface: Administration > Log > Log Module page, Status
field
Values:
0: Disabled
1: Enabled
Default: 0
Example: Logging enabled
<Status>1</Status>
<RAM_Log_Size> Description: The maximum size of the log file in kilobytes
User Interface: Administration > Log > Log Setting page, Log Size
field
Values: number from 128~1024
Default: 200
Example:
<RAM_Log_Size>200</RAM_Log_Size>

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English