Cisco SPA100 Series Provisioning Guide

Voice Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 136
6
<Cfwd_All_Act_Code> Forwards all calls to the extension specified after the
activation code.
Default setting: *72
<Cfwd_All_Deact_Code> Cancels call forwarding of all calls.
Default setting: *73
<Cfwd_Busy_Act_Code> Forwards busy calls to the extension specified after the
activation code.
Default setting: *90
<Cfwd_Busy_Deact_Code> Cancels call forwarding of busy calls.
Default setting: *91
<Cfwd_No_Ans_Act_Code> Forwards no-answer calls to the extension specified after the
activation code.
Default setting: *92
<Cfwd_No_Ans_Deact_Code> Cancels call forwarding of no-answer calls.
Default setting: *93
<Cfwd_Last_Act_Code> Forwards the last inbound or outbound call to the number that
the user specifies after entering the activation code.
Default setting: *63
<Cfwd_Last_Deact_Code> Cancels call forwarding of the last inbound or outbound call.
Default setting: *83
<Block_Last_Act_Code> Blocks the last inbound call.
Default setting: *60
<Block_Last_Deact_Code> Cancels blocking of the last inbound call.
Default setting: *80
<Accept_Last_Act_Code> Accepts the last outbound call. It lets the call ring through
when do not disturb or call forwarding of all calls are enabled.
Default setting: *64
<Accept_Last_Deact_Code> Cancels the code to accept the last outbound call.
Default setting: *84
<CW_Act_Code> Enables call waiting on all calls.
Default setting: *56
<CW_Deact_Code> Disables call waiting on all calls.
Default setting: *57

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English