Cisco SPA100 Series Provisioning Guide

Router Configuration Parameters
<Web_Management>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 189
7
<Web_Remote_Upgrade> Description: Enables or disables upgrading the firmware from a
computer on the WAN, when Remote Management is enabled
User Interface: Administration > Management > Web Access
Management page, Remote Upgrade field
Values:
0: Disabled
1: Enabled
Default: 0
Example:
<Web_Remote_Upgrade>1</Web_Remote_Upgrade>
<Allowed_Remote_IP_Type> Description: Specifies a method for identifying remote devices that
are allowed access to the web-based configuration utility, when
Remote Management is enabled
User Interface: Administration > Management > Web Access
Management page, Allowed Remote IPv4 Address field, Any IP
Address option
Values:
0: Specified IP Address
1: Any IP Address
Default: 1
Example:
<Allowed_Remote_IP_Type>0</Allowed_Remote_IP_Type>
Parameter Details

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English