Cisco SPA100 Series Provisioning Guide

Provisioning Parameters
Macro Expansion Variables
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 78
5
Parameter Name Description and Default Value
$ The form $$ expands to a single $ character.
A through P Replaced by the contents of the general purpose
parameters GPP_A through GPP_P.
SA through SD Replaced by the contents of the special purpose
parameters GPP_SA through GPP_SD. These
parameters are meant to hold keys or passwords used
in provisioning.
Note that $SA through $SD are only recognized as
arguments to the optional resync URL qualifier --key,
as in the following example:
[--key $SA] http://ps.callme.com/profiles/abcdefg.cfg
These variables are not expanded outside of this
limited context.
Note that these variables are not available on the
SPA500 Series phones.
MA MAC address using lower case hex digits, for example,
000e08aabbcc.
MAU MAC address using upper case hex digits, for example
000E08AABBCC.
MAC MAC address using lower case hex digits, and colons
to separate hex digit pairs, for example
00:0e:08:aa:bb:cc.
PN Product Name, for example SPA962.
PSN Product Series Number, for example 962.
SN Serial Number string, for example 88012BA01234.
CCERT SSL Client Certificate status: Installed or Not Installed.
IP IP address of the ATA within its local subnet, for
example 192.168.1.100.
EXTIP External IP of the ATA, as seen on the Internet, for
example 66.43.16.52.
SWVER Software version string, for example 2.0.6(b).
HWVER Hardware version string, for example 1.88.1.

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English