Cisco TelePresence MX200 G2 User Manual

15
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Receive Call
•
If someone calls you, you may
accept, decline or ignore the call.
•
If you decline the call, busy
information will be sent to the
calling party.
•
If you ignore the call, the calling
party will perceive this as if you
were absent (you did not pick up
the call.
•
You may want to set your system
to respond automatically to an
incoming call (Auto Answer). This
is described in “Administrator
Settings—Call Details” on page
76. Observe that your video
support team may have password
protected this menu.
•
If you choose to activate Auto
Answer you may want to mute the
microphone to preserve privacy.
This must be set up manually every
time.
If your system permits automatic response to incoming
calls (Auto Answer) you may want to mute the system
microphone(s), to preserve privacy.
Microphone(s) are muted if this symbol is illuminated. To
mute / unmute the microphone(s), tap the symbol.
If Someone Calls You
Receive Call

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30