Cisco TelePresence MX200 G2 User Manual

29
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Conference Calls with Multiple Participants
Manage Conference Call Layout
The new layout will now be put in eect.
To change the existing layout on your video screen, tap
Layout.
Tap the new preferred layout.
You may alter the screen layout
when you are in a call. The Touch
pad will show the options available.
The actual options may dier from
what is shown here, but the Touch
device will always show you what is
available.
The WYSIWYG (what you see is what
you get) principle applies even here.
Including a Selfview
Selfview (what the others see from
your video system) may be added
to any layout in the usual way. To
invoke the selfview See “Manage
Selfview” on page 58.
If needed, you may also move the
selfview to a dierent location.
See “Move the Selfview PiP” on
page 60.
About Layout Options

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30