Cisco TelePresence MX200 G2 User Manual

17
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Transfer
Basically, you have two options when
transferring calls; viz. unattended
and consultative transfer.
The scenario described on this page
is the unattended transfer, where
you transfer the call to someone
else without consulting that person
before the transfer is carried out.
If you consult the person rst, you
will transfer after having used the
swap feature—see the next page for
more on this.
About Transfer
Place the call in
the usual way.
In a call tap
Transfer.
Locate
whom to
call in the
usual way.
Tap Complete
transfer—see
also text in side
bar at right.
The call will be transferred.
Transfer Call

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30