Cisco TelePresence MX200 G2 User Manual

58
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
The Selfview shows what others see
from your video system. You will
normally use it to conrm that they
see what you want them to see.
The Selfview appears as a PiP
(Picture-in-Picture).
The position of Selfview PiP can be
changed if you wish—see “Move
the Selfview PiP” on page 60 for
details on this.
Camera
Manage Selfview
About Selfview
Tap Camera. Tap Selfview
to turn it on, if needed.
You may now resize the selfview
image (see the following
page for more), or control the
camera’s pan, tilt and zoom (see
the previous page for more).
Tap anywhere outside the
menu to exit.
Tap the
selfview
avatar.
In a call:
Outside a call:
You may now switch
the selfview o, maximize
or minimize it, or select
Camera to gain access to
the camera control (see the
previous page for more on
camera control).
Tap anywhere outside the
menu to exit.
Pan
Tilt
Zoom

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30