Camera
Speaker Tracking
Systems equipped with a speaker
tracking camera system use two
cameras working together with
a built-in microphone array. The
system will track and show the
person speaking so that you won’t
have to use the Camera Control
menu or Camera Presets to zoom in
and out.
When speaker tracking has been
activated, the camera position
presets will still be available.
However, if you tap a camera
position preset while in speaker
tracking mode, one of the cameras
will respond accordingly and the
speaker tracking will be deactivated.
Activate speaker tracking as shown
on this page again, if needed.
Note S
peaker tracking will not work if
the microphones are muted.
Speaker tracking may be expanded
to include the Snap to Whiteboard
feature, as outlined on the following
page.
About Speaker Tracking
To enable Speaker Tracking, tap Camera, in the upper
right corner.
Activate the Speaker Tracking feature by tapping the
button in the upper right corner.
Tap anywhere outside the menu to exit.
To deactivate Speaker Tracking, repeat the procedure.
To Next Page
Loading...
Need help?
General
