Cisco TelePresence MX200 G2 User Manual

74
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
For systems with two cameras set up
for speaker tracking, this window lets
you specify the tracking mode. Select
between Normal and Fast.
In addition, this window lets you con-
gure the Snap to Whiteboard feature.
Just follow the wizard to set up this
feature.
Note! Speaker tracking microphones
are height-above-oor sensitive. This
is used to make the system respond
to a speaking person standing by the
whiteboard only. A person sitting in
front of the whiteboard will then avoid
invoking the snap feature.
To make this work the system will look
and listen for a face located in the
upper half of the dened whiteboard
area.
The whiteboard must be located on
the wall opposing the camera system.
The feature has not been designed for
any other angle of incidence.
For a more detailed discussion on the
Snap to Whiteboard feature, see the
Administrator Guide for your video
system.
Settings
Administrator Settings—Tracking
About Tracking
Tap as shown to invoke the Snap
to Whiteboard setup wizard.

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30