Cisco TelePresence MX200 G2 User Manual

34
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Tap in the upper left corner
of the display.
Set Proximity to On or O
to activate or deactivate
Intelligent Proximity.
Activate and Deactivate Intelligent Proximity
Control Your System Wirelessly
The Intelligent Proximity feature allows
you to share, see and capture content
from a video system wirelessly on your
own device. You can also use your own
device to control calls on the video
system.
To activate the feature, do as shown
at left.
Observe that your video support team
may have activated all of the features
or just a subset of them.
About Activation

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30