Cisco TelePresence MX200 G2 User Manual

16
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Receive Call While in Another Call
Add: If your system
is equipped with
the MultiSite option
you may merge the
incoming call with the
existing.
For systems without
MultiSite installed, the
incoming call may still
be merged, but as an
audio-only call (not
shown).
Decline the incoming call and
carry on as you have been
doing.
Accept the incoming call, while ending
the current call or group of calls.
Accept the incoming call, while
holding the current call or group
of calls.
The identity of the new
incoming call.
If you already are in a call, you may
accept another incoming call under
certain circumstances.
About the Options
Receive Call

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30