D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
137
Cisco TelePresence MX700 and MX800 Administrator Guide
Operating temperature and humidity:
• Ambient temperature: 32°F to 104°F
(0°C to 40°C)
•
Relative humidity (RH): 10% to 90%
Storage and transport temperature:
• –4°F to 140°F (–20°C to 60°C) at RH 10% to 90%
(non-condensing)
Approvals and compliance
EU/EEC
Directive 2006/95/EC (Low Voltage Directive)
- Standard IEC/EN 60950-1
Directive 2004/108/EC (EMC Directive)
- Standard EN 55022, Class A
- Standard EN 55024
- Standard EN 61000-3-2/-3-3
Directive 2011/65/EU (RoHS)
Warning: This is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take
adequate measures.
USA
Approved according to UL 60950-1
Complies with FCC CFR 47 15B, Class A
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
Canada
Approved according to CAN/CSA C22.2 No. 60950-
1-07
This Class A digital apparatus complies with Canadian
ICES-003
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada
PRODUCT CAPABILITIES
Product delivered complete with:
• One mounting option, single or dual camera option,
Cisco Touch 10, codec, complete audio system,
2 × Cisco Microphone 60, two presentation cables.
Bandwidth
• H.323 and SIP up to 6 Mbps point-to-point
• Up to 10 Mpbs total MultiSite bandwidth
Minimum bandwidth for resolution / frame rate (H.264)
• 720p30 from 768 kbps
• 720p60 from 1152 kbps
• 1080p30 from 1472 kpbs
• 1080p60 from 2560 kbps
Firewall traversal
• Cisco TelePresence Expressway technology
• H.460.18 and H.460.19 firewall traversal
• SIP ICE (Interactive Connectivity Establishment)
Video standards
• H.261, H.263, H.263+, H.264
• H.265 (SIP)
Video features
• Advanced screen layouts
• Custom video layouts
• Local auto layout
Video inputs (five inputs)
Three HDMI inputs; support formats up to maximum
1920 × 1200@60fps, including:
• 1920 × 1080@60 and 59.94 Hz (1080p60)
• 1920 × 1080@50 Hz (1080p50)
• 1920 × 1080@30 and 29.97 Hz (1080p30)
• 1920 × 1080@25 Hz (1080p25)
• 1920 × 1080@24, and 23.97 Hz (1080p24)
• 1280 × 720@60, and 59.94 Hz (720p60)
• 1280 × 720@50 Hz (720p50)
• 720 × 480@60, and 59.94 Hz (480p60)
• 640 × 480@60 Hz (480p60)
• 1280 × 1024@60, and 75 Hz (SXGA)
• 1024 × 768@60, 70, 75, and 85 Hz (XGA)
• 800 × 600@56, 60, 72, 75, and 85 Hz (SVGA)
• 1920 × 1200@50 and 60 Hz (WUXGA)
• 1680 × 1050@60 Hz (WSXGA+)
• 1440 × 900@60 Hz (WXGA+)
• 1280 × 768@60 Hz (WXGA)
One DVI-I input
Analog (VGA or YPbPr); support formats up to
maximum 1920 × 1080@60fps (1080p60), including:
• 1920 × 1080@60 Hz (1080p)
• 1280 × 720@60 Hz (720p)
• 1280 × 1024@60 and 75 Hz (SXGA)
• 1280 × 960@60 Hz
• 1024 × 768@60, 70, 75, and 85 Hz (XGA)
• 1680 × 1050@60 Hz (WSXGA+)
• 1440 × 900@60 Hz (WXGA+)
• 1280 × 800@60 Hz (WXGA)
• 1280 × 768@60 Hz (WXGA)
Digital (DVI-D); support formats up to maximum 1920
× 1080@60fps, including:
• 1920 × 1080@60, 59.94 Hz (1080p60)
• 1920 × 1080@50 Hz (1080p50)
• 1920 × 1080@30, 29.97 Hz (1080p30)
• 1920 × 1080@25 Hz (1080p25)
• 1920 × 1080@24, 23.97 Hz (1080p24)
• 1280 × 720@60, 59.94 Hz (720p60)
• 1280 × 720@50 Hz (720p50)
• 720 × 480@60, 59.94 Hz (480p60)
• 640 × 480@60 Hz (480p60)
• 1280 × 1024@60, 75 Hz (SXGA)
• 1024 × 768@60, 70, 75, 85 Hz (XGA)
• 800 × 600@56, 60, 72, 75, 85 Hz (SVGA)
• 1680 × 1050@60 Hz (WSXGA+)
• 1440 × 900@60 Hz (WXGA+)
• 1280 × 768@60 Hz (WXGA)
One Composite/S-Video Input (BNC Connectors)
• PAL/NTSC
HDMI input 1 is used for Main Camera (included in base
package)
HDMI input 2 is used in addition if Speaker Track Option
(2
nd
camera) is installed
Extended Display Identification Data (EDID)
Video outputs (three outputs)
Two HDMI outputs and one DVI-I output; supports
formats up to maximum 1920 × 1080@60fps
(1080p60), including:
• 1920 × 1080@60 Hz (1080p60)
• 1920 × 1080@50 Hz (1080p50)
• 1280 × 720@60 Hz (720p60)
• 1280 × 720@50 Hz (720p50)
MX700: HDMI output 1 and 2 are in use for the two
integrated screens
MX800: HDMI output 1 is in use for the integrated
screen
VESA Monitor Power Management
Extended Display Identification Data (EDID)
Enccode/decode video formats
Supports encode/decode video formats up to maximum
1920 × 1080@60fps (HD1080p60), including:
• 176 × 144@30 frames per second (fps) (QCIF)
• 352 × 288@30 fps (CIF)
• 512 × 288@30 fps (w288p)
• 576 × 448@30 fps (448p)
• 768 × 448@30 fps (w448p)
• 704 × 576@30 fps (4CIF)
• 1024 × 576@30 fps (w576p)
• 1280 × 720@30 fps (720p30)
• 1920 × 1080@30 fps (1080p30)
• 640 × 480@30 fps (VGA)
• 800 × 600@30 fps (SVGA)
• 1024 × 768@30 fps (XGA)
• 1280 × 1024@30 fps (SXGA)
• 1280 × 768@30 fps (WXGA)
• 1440 × 900@30 fps (WXGA+)
• 1680 × 1050@30 fps (WSXGA+)
• 512 × 288@60 fps (w288p60)
• 768 × 448@60 fps (w448p60)
• 1024 × 576@60 fps (w576p60)
• 1280 × 720@60 fps (720p60)
• 1920 × 1080@60 fps (1080p60)
To Next Page
Loading...
Need help?
General
