MaximumMinimumSymbolParameter
70°C (158°F)0°C (32°F)TCCase temperature
2,
95%5%RHRelative humidity
2
3.5 V3.1 VVCCT,RModule supply voltage
2
1
Absolute maximum ratings are those values beyond which damage to the device may occur if these
limits are exceeded for other than a short period of time.
2
Functional performance is not intended, device reliability is not implied, and damage to the device may
occur over an extended period of time between absolute maximum ratings and the recommended
operating conditions.
General Specifications for Cisco Fibre Channel SFP Transceivers
The table below lists the general specifications for Cisco Fibre Channel SFP transceivers at 4 Gbps.
Table 15: General Specifications for Cisco Fibre Channel SFP Transceivers at 4 Gbps
Short WavelengthDescription
LCConnector type
850 nmWavelength
MMFFibre type
62.5 microns—164.04 yd (150 m)
50 microns—328.08 yd (300 m)Core size—Cable distance
-9 to -2.5 dBMTransmit power
3
Approximate; actual distance may vary depending on fiber quality and other factors.
Environmental Conditions and Power Requirements Specification for SFP
Transceivers
Table 16: Environmental Conditions and Power Requirements Specifications for SFP Transceivers
MaximumMinimumSymbolParameter
85°C (185°F)-40°C (-40°F)TSStorage temperature
4
70°C (158°F)0°C (32°F)TCCase temperature
2,
95%5%RHRelative humidity
2
3.5 V3.1 VVCCT,RModule supply voltage
2
4
Absolute maximum ratings are those values beyond which damage to the device may occur if these
limits are exceeded for other than a short period of time.
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
58
Technical Specifications
General Specifications for Cisco Fibre Channel SFP Transceivers
To Next Page
Loading...
Need help?
General
