Cisco UCS X9508 Installation Notes

Step 4 Attach any IFM cables as needed.
Removing the Cable Management Tray
Use the following procedure to remove the cable management tray(s).
Step 1 (Optional) Remove or lift the cables to allow easier access to the cable management tray.
Step 2 Detach the cable management tray from the chassis.
a) At each corner of the cable management tray, apply equal pressure to slide the tray upward in the chassis notch until
it can no longer slide up.
Installation
52
Installation
Removing the Cable Management Tray

Cisco UCS X9508 Specifications

General

Brand	Cisco
Model	UCS X9508
Category	Server
Language	English