To Next PageTo Next Page
Need help?Do you have a question about the Cisco UCS X210c M6 and is the answer not in the manual?
General| Product Type | Blade Server |
|---|---|
| Processor | Intel Xeon Scalable Processors |
| Max Processors | 2 |
| Management | Cisco Intersight |
| Memory | Up to 6TB DDR4 |
Provides a detailed overview of the Cisco UCS X210c M6 compute node's capabilities and features.
Describes the front panel of the compute node, including LEDs and connectors for system status and functionality.
Details the local console connector and its use for direct system access and installation.
Provides information on understanding the various LEDs on the compute node for status indication.
Describes the procedure for removing a compute node blank from the chassis.
Details the steps to install a compute node blank into an empty slot in the chassis.
Outlines the steps for safely removing a compute node from the chassis.
Provides the step-by-step guide for installing a compute node into the chassis.
Explains how to configure the compute node after installation using Cisco Intersight.
Details the procedures for removing and installing the compute node's top cover.
Covers procedures for installing, removing, and managing drives and drive blanks.
Covers guidelines, removal, and installation of the front mezzanine storage module.
Covers CPU and heatsink replacement, configuration rules, and tools.
Covers replacing memory DIMMs and population guidelines.
Covers PMEM replacement, population rules, installation, and BIOS configuration.
Covers service for mLOM and VIC cards, including installation and considerations.
Covers service for the Trusted Platform Module (TPM), including enabling and removal.
Covers the mini-storage module and M.2 SSD replacement procedures.
Covers service for the boot-optimized M.2 RAID controller module.
Provides instructions for recycling the Printed Circuit Board Assembly (PCBA).
Lists the physical dimensions and weight specifications for the compute node.
