Cisco UCS X210c M6 User Manual

What to do next
Install the M.2 SSD.
Installing an M.2 SSD Card
The M.2 SSD plugs into a socket on the carrier. One end of the socket has two parallel guide clips to hold
one end of the SSD, and the other end of the socket has two alignment pins and one retaining clip that lock
the SSD into place.
Install the M.2 SSD into the carrier.
a) Orient the SSD correctly.
When correctly oriented, the end of the SSD with two alignment holes lines up with the two alignment pins
on the carrier.
Note
b) Angle the end with the screw into the end of the carrier that has 2 parallel guide clips.
c) Press the other end of the SSD into the carrier until the alignment pins engage, and the retaining clip clicks the SSD
into place.
Cisco UCS X210c M6 Compute Node Installation and Service Note
63
Servicing a Compute Node
Installing an M.2 SSD Card

Cisco UCS X210c M6 Specifications

General

Brand	Cisco
Model	UCS X210c M6
Category	Server
Language	English