Replacing Memory DIMMs
The DIMMs that this compute node supports are updated frequently. A list of supported and available DIMMs
is in Cisco UCS X210c M6 Specification Sheet.
Do not use any DIMMs other than those listed in the specification sheet. Doing so may irreparably damage
the compute node and result in down time.
Memory Population Guidelines
The following is a partial list of memory usage and population guidelines. For detailed information about
memory usage and population, download the Cisco UCS C220/C240/B200 M6 Memory Guide.
Only Cisco memory is supported. Third-party DIMMs are not tested or supported.
Caution
This compute node contains 32 DIMM slots—16 per CPU
Memory Considerations
• All DIMMs must be all DDR4 DIMMs.
Cisco UCS X210c M6 Compute Node Installation and Service Note
47
Servicing a Compute Node
Replacing Memory DIMMs
To Next Page
Loading...
