Figure 22: Securing the Front of the Chassis to the Rack
Step 5 Choose the appropriate option:
a) If your chassis will ship pre-installed in a rack, attach the rear mounting brackets. If you plan to install and ship your
chassis in a shippable rack, attach the rear mounting brackets. See Installing Rear Mounting Brackets, Round-Hole
Rack, on page 42.
b) If you will be installing the chassis in a stationary rack, continue the installation procedure. See Completing Installation,
on page 44.
Installing Rear Mounting Brackets, Square-Hole Rack
Use this procedure to install the rear mounting (tie down) brackets (UCSX-9508-RACKBK) for a chassis that
is not pre-installed in a rack.
Installation
40
Installation
Installing Rear Mounting Brackets, Square-Hole Rack
To Next Page
Loading...
