Cisco WAP150 User Manual

LAN 17
IPv4 Configuration 17
DHCP Auto Configuration Settings 18
IPv6 Configuration 19
Port Settings 20
Spanning Tree Protocol 20
VLANs Setting 21
Neighbor Discover 21
LLDP 22
IPv6 Tunnel 22
Time 23
Automatically Acquiring the Time Settings through NTP 23
Manually Configuring the Time Settings 24
Notification 25
LED Display 25
Log Settings 25
Remote Log Server Table 26
View System Log 27
Email Alert/ Mail Server/ Message Configuration 27
Email Alert Examples 28
User Accounts 29
Adding a User 29
Changing a User Password 30
Management 30
Management 31
Connect Session Settings/HTTP/HTTPS Service 31
SSL Certificate File Status 32
SNMP / SNMPv2c Settings 33
SNMPv3 Views 34
SNMPv3 Groups 35
SNMPv3 Users 36
SNMPv3 Targets 37
Plug and Play (PnP) 38
Security 39
Cisco WAP150 Wireless-AC/N Dual Radio Access Point with PoE / Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE
vi
Contents

Cisco WAP150 Specifications

General

VLAN support	Yes
Number of users	64 user(s)
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1200 Mbit/s
Antenna type	Internal
Placement	Table, Wall
Cable lock slot type	Kensington
Security algorithms	HTTPS, SSID, WPA, WPA2
Service Set Identifier (SSID) features	SSID broadcast on/off
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
USB 2.0 ports quantity	0

Weight and Dimensions

Depth	38 mm
Width	135 mm
Weight	350 g