Using Basic Phone Functions
Choosing an Audio Device
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 28
2
Choosing your preferred
audio device
Not available on Cisco SPA301, Cisco SPA501G,
or Cisco SPA525G/G2
If you press a line button or begin dialing without
lifting the handset, your Preferred Audio Device is
used. By default, the speaker is preferred.
Alternatively, you can choose the headset.
1. Press .
2. Select Preferences.
3. Select Preferred Audio Device, and then press
.
4. Press to view and select a device.
5. Press , and then press .
Choosing a Bluetooth
headset for a call
Available only on Cisco SPA525G/G2
1. Make sure your headset is powered on.
2. Press on your phone (or, if supported, press
the Answer button on your Bluetooth headset
twice).
3. Dial the number to place a call.
4. Press the Answer button on your Bluetooth
headset to answer a ringing call. See the user
documentation for your Bluetooth headset for
more information.
For more options with Cisco SPA525G2, see Using
the Cisco SPA 525G2 With Your Bluetooth-
Enabled Mobile Phone, page 81.
Task Instructions
To Next Page
Loading...
