Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 82
3
• Import your mobile phone address book to your Cisco SPA 525G2 personal
address book.
• Use your Cisco SPA 525G2 as a “handsfree device” for your mobile phone.
NOTE Not all mobile phones support this function. For information about compatible
Bluetooth-enabled mobile phones, visit the Cisco Small Business support
community (http://www.cisco.com/go/smallbizsupport), and view the latest Cisco
SPA 525G2 release notes available at Cisco.com.
Enabling Bluetooth
STEP 1 Press .
STEP 2 Scroll to User Preferences and press .
STEP 3 Scroll to Bluetooth Configuration and press .
STEP 4 With Bluetooth selected, press the right-arrow navigation button until a blue check
mark appears.
STEP 5 Press .
Pairing Your Cisco SPA 525G2 with a Bluetooth-Enabled
Mobile Phone
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1.1
NOTE Not all mobile phones support this function. For information about compatible
Bluetooth-enabled mobile phones, visit the Cisco Small Business support
community (http://www.cisco.com/go/smallbizsupport), and view the latest Cisco
SPA 525G2 release notes available at cisco.com.
To pair your Cisco SPA 525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA 525G2, or from your mobile phone.
To Next Page
Loading...
