Cisco WIP320 - Adjusting Volume and Muting

Using Basic Phone Functions
Adjusting Volume and Muting
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 29
2
Adjusting Volume and Muting
You can adjust the call volume for each audio device (handset, headset, and
speaker). You also can adjust the ringer volume. During a call, you can mute and
unmute your phone.
NOTE The volume settings apply to the selected device: handset, headset, speaker, or
ringer.
Mute and headset are not available on Cisco SPA301.
Task Instructions
Adjusting the audio
volume during a call
• Cisco SPA301: Press the Volume button
repeatedly.
• Other models: Press + on the Volume button
to increase the volume, or press - to
decrease the volume. Optionally, press
to save this setting for future calls
(not available Cisco SPA501G).
Adjusting the audio
volume when the phone
is idle
• Cisco SPA301: Lift the handset. Press the
Volume button repeatedly.
• Other models: Choose any audio device.
Press + on the Volume button to increase the
volume, or press - to decrease the volume.
Optionally, press to save this setting
for future calls (not available Cisco SPA501G).
Adjusting the ringer
volume when the phone
is ringing or idle
• Cisco SPA301: Press the Volume button
repeatedly.
• Other models: Press + on the Volume button
to increase the ringer volume, or press - to
decrease the ringer volume. Optionally, press
to save this setting for future calls
(not available Cisco SPA501G).
Save
Save
Save