Cisco WIP320 - Page 38

Using Basic Phone Functions
Using the Intercom and Paging Features
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 38
2
Changing your auto-
answer settings
Not available on Cisco SPA301
Cisco SPA303 and
SPA50xG models
By default, all phones are configured to auto-
answer pages. To adjust this setting, follow these
steps:
1. Press .
2. Select Preferences.
3. Select Auto Answer Page, and then press
.
4. Press to select Yes (auto-answer is
enabled) or No (auto-answer is disabled).
5. Press and then press .
Cisco SPA525G/G2 By default, all phones are configured to auto-
answer pages. To adjust this setting, follow these
steps:
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Select Auto Answer Page.
5. Press the right-arrow or left-arrow navigation
button to select a check mark to enable this
feature or a minus sign (-) sign to disable this
feature.
6. Press .
Task Instructions
Edit
Y/N
OK
Save
Save