Cisco WIP320 - Page 53

Using Basic Phone Functions
Using the Phone Directories
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 53
2
Copy a contact record to
create a new entry
Cisco SPA50xG models
1. Scroll to the contact.
2. Press the right-arrow navigation button to view
other softkeys, and then press . If the
Results window is active, press to return
to the Directory menu.
3. With the Directory menu displayed, press
.
4. Edit the name, number, and ring tone as needed.
(See the editing instructions in this table.)
5. Press .
Cisco SPA525G/G2
1. Scroll to the contact.
2. Press , select Copy, and then press
.
3. Press , select Paste, and then press
.
4. Edit the name, number, and ring tone as needed.
See the editing instructions in this table.
5. Press .
Task Instructions
Copy
Cancel
Paste
Save
Option
Select
Option
Select
Save