Cisco WS-C2960-24LC-S User Manual

Contents
xi
Catalyst 2960 Switch Software Configuration Guide
OL-8603-04
Configuring Smartports Macros 11-2
Default Smartports Macro Configuration 11-2
Smartports Macro Configuration Guidelines 11-2
Creating Smartports Macros 11-4
Applying Smartports Macros 11-5
Applying Cisco-Default Smartports Macros 11-6
Displaying Smartports Macros 11-8
CHAPTER 12 Configuring VLANs 12-1
Understanding VLANs 12-1
Supported VLANs 12-2
VLAN Port Membership Modes 12-3
Configuring Normal-Range VLANs 12-4
Token Ring VLANs 12-5
Normal-Range VLAN Configuration Guidelines 12-5
VLAN Configuration Mode Options 12-6
VLAN Configuration in config-vlan Mode 12-6
VLAN Configuration in VLAN Database Configuration Mode 12-6
Saving VLAN Configuration 12-6
Default Ethernet VLAN Configuration 12-7
Creating or Modifying an Ethernet VLAN 12-8
Deleting a VLAN 12-9
Assigning Static-Access Ports to a VLAN 12-10
Configuring Extended-Range VLANs 12-11
Default VLAN Configuration 12-11
Extended-Range VLAN Configuration Guidelines 12-12
Creating an Extended-Range VLAN 12-12
Displaying VLANs 12-13
Configuring VLAN Trunks 12-14
Trunking Overview 12-14
IEEE 802.1Q Configuration Considerations 12-15
Default Layer 2 Ethernet Interface VLAN Configuration 12-16
Configuring an Ethernet Interface as a Trunk Port 12-16
Interaction with Other Features 12-16
Configuring a Trunk Port 12-17
Defining the Allowed VLANs on a Trunk 12-18
Changing the Pruning-Eligible List 12-19
Configuring the Native VLAN for Untagged Traffic 12-19
Configuring Trunk Ports for Load Sharing 12-20

Cisco WS-C2960-24LC-S Specifications

General

Brand	Cisco
Model	WS-C2960-24LC-S
Category	Network Router
Language	English