Contents
xx
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Configuring Protected Ports 23-6
Default Protected Port Configuration 23-7
Protected Port Configuration Guidelines 23-7
Configuring a Protected Port 23-7
Configuring Port Blocking 23-8
Default Port Blocking Configuration 23-8
Blocking Flooded Traffic on an Interface 23-8
Configuring Port Security 23-9
Understanding Port Security 23-9
Secure MAC Addresses 23-9
Security Violations 23-10
Default Port Security Configuration 23-11
Port Security Configuration Guidelines 23-11
Enabling and Configuring Port Security 23-13
Enabling and Configuring Port Security Aging 23-17
Port Security and Private VLANs 23-19
Displaying Port-Based Traffic Control Settings 23-20
CHAPTER
24 Configuring CDP 24-1
Understanding CDP 24-1
Configuring CDP 24-2
Default CDP Configuration 24-2
Configuring the CDP Characteristics 24-2
Disabling and Enabling CDP 24-3
Disabling and Enabling CDP on an Interface 24-4
Monitoring and Maintaining CDP 24-5
CHAPTER
25 Configuring LLDP and LLDP-MED 25-1
Understanding LLDP and LLDP-MED 25-1
Understanding LLDP 25-1
Understanding LLDP-MED 25-2
Configuring LLDP and LLDP-MED 25-3
Default LLDP Configuration 25-3
Configuring LLDP Characteristics 25-4
Disabling and Enabling LLDP Globally 25-5
Disabling and Enabling LLDP on an Interface 25-5
Configuring LLDP-MED TLVs 25-6
Monitoring and Maintaining LLDP and LLDP-MED 25-7
To Next Page
Loading...
