Cisco WS-C3020 - Monitoring Private Vlans

14-14
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Chapter 14 Configuring Private VLANs
Monitoring Private VLANs
Monitoring Private VLANs
Table 14-1 shows the privileged EXEC commands for monitoring private-VLAN activity.
This is an example of the output from the show vlan private-vlan command:
Switch(config)# show vlan private-vlan
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
10 501 isolated Gi0/1, Gi0/2, Gi0/3
10 502 community Gi0/1, Gi0/2, Gi0/4
10 503 non-operational
Table 14-1 Private VLAN Monitoring Commands
Command Purpose
show interfaces status Displays the status of interfaces, including the VLANs to which they belongs.
show vlan private-vlan [type] Display the private-VLAN information for the switch.
show interface switchport Display private-VLAN configuration on interfaces.
show interface private-vlan mapping Display information about the private-VLAN mapping for VLAN SVIs.