Contents
xxiii
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Configuring SNMP 30-6
Default SNMP Configuration 30-6
SNMP Configuration Guidelines 30-6
Disabling the SNMP Agent 30-7
Configuring Community Strings 30-8
Configuring SNMP Groups and Users 30-9
Configuring SNMP Notifications 30-11
Setting the Agent Contact and Location Information 30-14
Limiting TFTP Servers Used Through SNMP 30-15
SNMP Examples 30-16
Displaying SNMP Status 30-17
CHAPTER
31 Configuring Network Security with ACLs 31-1
Understanding ACLs 31-1
Supported ACLs 31-2
Port ACLs 31-3
Router ACLs 31-4
VLAN Maps 31-5
Handling Fragmented and Unfragmented Traffic 31-5
Configuring IPv4 ACLs 31-6
Creating Standard and Extended IPv4 ACLs 31-7
Access List Numbers 31-8
ACL Logging 31-8
Creating a Numbered Standard ACL 31-9
Creating a Numbered Extended ACL 31-10
Resequencing ACEs in an ACL 31-14
Creating Named Standard and Extended ACLs 31-14
Using Time Ranges with ACLs 31-16
Including Comments in ACLs 31-18
Applying an IPv4 ACL to a Terminal Line 31-18
Applying an IPv4 ACL to an Interface 31-19
Hardware and Software Treatment of IP ACLs 31-21
IPv4 ACL Configuration Examples 31-21
Numbered ACLs 31-23
Extended ACLs 31-23
Named ACLs 31-23
Time Range Applied to an IP ACL 31-24
Commented IP ACL Entries 31-24
ACL Logging 31-25
To Next Page
Loading...
