Contents
xxv
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Displaying Auto-QoS Information 32-30
Configuring Standard QoS 32-30
Default Standard QoS Configuration 32-31
Default Ingress Queue Configuration 32-31
Default Egress Queue Configuration 32-32
Default Mapping Table Configuration 32-33
Standard QoS Configuration Guidelines 32-33
QoS ACL Guidelines 32-33
Applying QoS on Interfaces 32-33
Policing Guidelines 32-34
General QoS Guidelines 32-34
Enabling QoS Globally 32-35
Enabling VLAN-Based QoS on Physical Ports 32-35
Configuring Classification Using Port Trust States 32-36
Configuring the Trust State on Ports within the QoS Domain 32-36
Configuring the CoS Value for an Interface 32-38
Configuring a Trusted Boundary to Ensure Port Security 32-38
Enabling DSCP Transparency Mode 32-40
Configuring the DSCP Trust State on a Port Bordering Another QoS Domain 32-40
Configuring a QoS Policy 32-42
Classifying Traffic by Using ACLs 32-43
Classifying Traffic by Using Class Maps 32-46
Classifying, Policing, and Marking Traffic on Physical Ports by Using Policy Maps 32-48
Classifying, Policing, and Marking Traffic on SVIs by Using Hierarchical Policy Maps 32-52
Classifying, Policing, and Marking Traffic by Using Aggregate Policers 32-58
Configuring DSCP Maps 32-60
Configuring the CoS-to-DSCP Map 32-60
Configuring the IP-Precedence-to-DSCP Map 32-61
Configuring the Policed-DSCP Map 32-62
Configuring the DSCP-to-CoS Map 32-63
Configuring the DSCP-to-DSCP-Mutation Map 32-64
Configuring Ingress Queue Characteristics 32-66
Mapping DSCP or CoS Values to an Ingress Queue and Setting WTD Thresholds 32-67
Allocating Buffer Space Between the Ingress Queues 32-68
Allocating Bandwidth Between the Ingress Queues 32-68
Configuring the Ingress Priority Queue 32-69
To Next Page
Loading...
