Contents
iv
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Using Command History 2-6
Changing the Command History Buffer Size 2-6
Recalling Commands 2-6
Disabling the Command History Feature 2-7
Using Editing Features 2-7
Enabling and Disabling Editing Features 2-7
Editing Commands through Keystrokes 2-7
Editing Command Lines that Wrap 2-9
Searching and Filtering Output of show and more Commands 2-10
Accessing the CLI 2-10
CHAPTER
3 Assigning the Switch IP Address and Default Gateway 3-1
Understanding the Bootup Process 3-1
Assigning Switch Information 3-2
Default Switch Information 3-3
Understanding DHCP-Based Autoconfiguration 3-3
DHCP Client Request Process 3-4
Understanding DHCP-based Autoconfiguration and Image Update 3-4
DHCP Autoconfiguration 3-5
DHCP Auto-Image Update 3-5
Limitations and Restrictions 3-5
Configuring DHCP-Based Autoconfiguration 3-6
DHCP Server Configuration Guidelines 3-6
Configuring the TFTP Server 3-7
Configuring the DNS 3-7
Configuring the Relay Device 3-7
Obtaining Configuration Files 3-8
Example Configuration 3-9
Configuring the DHCP Auto Configuration and Image Update Features 3-11
Configuring DHCP Autoconfiguration (Only Configuration File) 3-11
Configuring DHCP Auto-Image Update (Configuration File and Image) 3-12
Configuring the Client 3-13
Manually Assigning IP Information 3-14
Checking and Saving the Running Configuration 3-15
Modifying the Startup Configuration 3-17
Default Bootup Configuration 3-18
Automatically Downloading a Configuration File 3-18
Specifying the Filename to Read and Write the System Configuration 3-18
Booting Up Manually 3-19
To Next Page
Loading...
