Cisco WS-C3020 - Page 6

Contents
vi
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Configuring the Source IP Address for NTP Packets 5-10
Displaying the NTP Configuration 5-11
Configuring Time and Date Manually 5-11
Setting the System Clock 5-11
Displaying the Time and Date Configuration 5-12
Configuring the Time Zone 5-12
Configuring Summer Time (Daylight Saving Time) 5-13
Configuring a System Name and Prompt 5-14
Default System Name and Prompt Configuration 5-15
Configuring a System Name 5-15
Understanding DNS 5-15
Default DNS Configuration 5-16
Setting Up DNS 5-16
Displaying the DNS Configuration 5-17
Creating a Banner 5-17
Default Banner Configuration 5-17
Configuring a Message-of-the-Day Login Banner 5-18
Configuring a Login Banner 5-19
Managing the MAC Address Table 5-19
Building the Address Table 5-20
MAC Addresses and VLANs 5-20
Default MAC Address Table Configuration 5-21
Changing the Address Aging Time 5-21
Removing Dynamic Address Entries 5-22
Configuring MAC Address Notification Traps 5-22
Adding and Removing Static Address Entries 5-24
Configuring Unicast MAC Address Filtering 5-25
Displaying Address Table Entries 5-26
Managing the ARP Table 5-27
CHAPTER 6 Configuring SDM Templates 6-1
Understanding the SDM Templates 6-1
Dual IPv4 and IPv6 SDM Templates 6-2
Configuring the Switch SDM Template 6-3
Default SDM Template 6-3
SDM Template Configuration Guidelines 6-4
Setting the SDM Template 6-4
Displaying the SDM Templates 6-5