Cisco WS-C3020 - Page 924

Index
IN-8
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
default configuration (continued)
RSPAN
27-9
SDM template 6-3
SNMP 30-6
SPAN 27-9
SSL 7-44
standard QoS 32-31
STP 16-11
system message logging 29-3
system name and prompt 5-15
TACACS+ 7-13
UDLD 26-4
VLAN, Layer 2 Ethernet interfaces 11-19
VLANs 11-8
VMPS 11-29
voice VLAN 13-3
VTP 12-6
default gateway 3-14, 34-10
default networks 34-31
default routes 34-31
default routing 34-2
deleting VLANs 11-10
denial-of-service attack 23-1
description command 9-19
destination addresses
in IPv6 ACLs
37-4
destination addresses, in IPv4 ACLs 31-11
destination-IP address-based forwarding,
EtherChannel
33-7
destination-MAC address forwarding, EtherChannel 33-6
detecting indirect link failures, STP 18-5
device B-23
device discovery protocol 24-1, 25-1
device manager
benefits
1-2
described 1-2, 1-3
in-band management 1-4
requirements xxxvi
upgrading a switch B-23
DHCP
Cisco IOS server database
configuring
20-13
default configuration 20-8
described 20-6
enabling
relay agent
20-10
server 20-10
DHCP-based autoconfiguration
client request message exchange
3-4
configuring
client side
3-3
DNS 3-7
relay device 3-7
server side 3-6
server-side 20-10
TFTP server 3-7
example 3-9
lease options
for IP address information
3-6
for receiving the configuration file 3-6
overview 3-3
relationship to BOOTP 3-3
relay support 1-4, 1-9
support for 1-4
DHCP-based autoconfiguration and image update
configuring
3-11 to 3-13
understanding 3-4 to 3-5
DHCP binding database
See DHCP snooping binding database
DHCP binding table
See DHCP snooping binding database
DHCP option 82
circuit ID suboption
20-5
configuration guidelines 20-8
default configuration 20-8
displaying 20-15
forwarding address, specifying 20-10
helper address 20-10