Cisco WS-C3020 - Page 958

Index
IN-42
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
uploading (continued)
image files
preparing
B-26, B-29, B-33
reasons for B-24
using FTP B-32
using RCP B-36
using TFTP B-28
User Datagram Protocol
See UDP
user EXEC mode
2-2
username-based authentication 7-6
V
version-dependent transparent mode 12-4
virtual router 38-1, 38-2
vlan.dat file 11-5
VLAN 1, disabling on a trunk port 11-22
VLAN 1 minimization 11-22
VLAN ACLs
See VLAN maps
vlan-assignment response, VMPS
11-28
VLAN configuration
at bootup
11-8
saving 11-8
VLAN configuration mode 2-2, 11-7
VLAN database
and startup configuration file
11-8
and VTP 12-1
VLAN configuration saved in 11-7
VLANs saved in 11-4
vlan database command 11-7
vlan dot1q tag native command 15-5
VLAN filtering and SPAN 27-6
vlan global configuration command 11-7
VLAN ID, discovering 5-27
VLAN load balancing on flex links 19-2
configuration guidelines 19-5
VLAN management domain 12-2
VLAN Management Policy Server
See VMPS
VLAN map entries, order of
31-29
VLAN maps
applying
31-33
common uses for 31-33
configuration guidelines 31-29
configuring 31-28
creating 31-30
defined 31-2
denying access to a server example 31-35
denying and permitting packets 31-31
displaying 31-39
examples of ACLs and VLAN maps 31-31
removing 31-33
support for 1-7
wiring closet configuration example 31-34
VLAN membership
confirming
11-31
modes 11-3
VLAN Query Protocol
See VQP
VLANs
adding
11-9
adding to VLAN database 11-9
aging dynamic addresses 16-9
allowed on trunk 11-22
and spanning-tree instances 11-3, 11-6, 11-13
configuration guidelines, extended-range
VLANs
11-13
configuration guidelines, normal-range VLANs 11-6
configuration options 11-7
configuring 11-1
configuring IDs 1006 to 4094 11-13
connecting through SVIs 9-6
creating in config-vlan mode 11-9
creating in VLAN configuration mode 11-10
customer numbering in service-provider
networks
15-3