Cisco XR 12000 User Manual

152 unique entries (320 possible, 0 filtered)
Dec 16 16:33:19.238 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: Allocated port array, size
3
Dec 16 16:33:19.242 gether/0/main 0/RSP0/CPU0 1# t1 ETH_TRACE: ethernet_event_mgr_init:
Creating EVM
Dec 16 16:33:19.242 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: ethernet_event_mgr_init: EVM
created 0x5005a910, msgch 0x5005a9f0, node 0/RSP0/CPU0
Dec 16 16:33:19.260 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: ethernet_chkpt_init: checkpoint
init succeeded: restart 0, 0x1f50
Dec 16 16:33:19.261 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: ethernet_timer_system_init:
Timer init successful
Dec 16 16:33:20.725 gether/0/main 0/RSP0/CPU0 2# t1 ETH_IM: Carrier delay timer created
for None (0x00000000)
Dec 16 16:33:20.726 gether/0/main 0/RSP0/CPU0 2# t1 ETH_INFO: Port created ok for bay=0,
port=1
Dec 16 16:33:20.726 gether/0/main 0/RSP0/CPU0 1# t4 ETH_TRACE: ethernet_evm_thread: Ethernet
EVM thread
Dec 16 16:33:20.726 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: G-Ether library initialization
successful
Dec 16 16:33:20.726 gether/0/main 0/RSP0/CPU0 1# t4 Created IDB tree RW lock
Dec 16 16:33:20.726 gether/0/main 0/RSP0/CPU0 1# t4 DB: Module initialized: Success
Dec 16 16:33:20.726 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: ethernet_netio_connection_init:
Connecting to NetIO, dll_name libether_ctrl_mgmt_netio.dll, dll_init_func
ether_ctrl_mgmt_netio_init_func, node 1
Dec 16 16:33:20.726 gether/0/main 0/RSP0/CPU0 1# t4 ETH_TRACE: ethernet_im_connection_init:
Connecting to IM
Dec 16 16:33:20.832 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: ethernet_netio_conn_open:
notify event has been created
Dec 16 16:33:20.832 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: ethernet_netio_conn_open:
Bind & initializaton of netio done
Dec 16 16:33:20.832 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO:
ethernet_netio_conn_notify_handler: load NetIO dll libether_ctrl_mgmt_netio.dll
Dec 16 16:33:20.833 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: Event conn open to IM failed
- retry scheduled
Dec 16 16:33:20.833 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: ethernet_im_connection_init:
IM connection init done
Dec 16 16:33:20.833 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: Initializing connection to
Cfgmgr
Dec 16 16:33:20.974 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: Cfgmgr connection
initialization successful
Dec 16 16:33:21.397 gether/0/main 0/RSP0/CPU0 1# t4 ETH_TRACE: Successfully initialized
PFI protect.
Dec 16 16:33:21.397 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: ethernet_if_owner_edm_init:
Interface owner EDM init
Dec 16 16:33:22.161 gether/0/main 0/RSP0/CPU0 1# t1 ETH_INFO: ethernet_netio_connection_init:
Netio connection init done, node 1
Dec 16 16:33:23.679 gether/0/main 0/RSP0/CPU0 1# t4 ETH_TRACE: Successfully initialized
Attributes Library.
Dec 16 16:33:23.684 gether/0/main 0/RSP0/CPU0 1# t4 ETH_SYSDB: ethernet_sysdb_edm_init:
Sysdb bind to /oper/ethernet_drvr/if/ successful, node 1
Dec 16 16:33:23.686 gether/0/main 0/RSP0/CPU0 1# t4 ETH_SYSDB: ethernet_sysdb_init:
Connecting to Sysdb, config mask 0x0, node 1
Dec 16 16:33:23.686 gether/0/main 0/RSP0/CPU0 2# t4 ETH_SYSDB: ethernet_sysdb_conn_open:
Connected to Sysdb, config mask 0x0, node 1
Dec 16 16:33:23.688 gether/0/main 0/RSP0/CPU0 1# t4 ETH_SYSDB: ethernet_sysdb_conn_open:
Sysdb bind to /cfg/if/act/ successful, node 1
Dec 16 16:33:23.688 gether/0/main 0/RSP0/CPU0 2# t4 ETH_SYSDB: ethernet_sysdb_init: Sysdb
connection init done, node 1
Dec 16 16:33:23.688 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: Initializing termination
timers
Dec 16 16:33:23.688 gether/0/main 0/RSP0/CPU0 2# t4 ETH_ERR: ethernet_im_conn_open:
im_control_server_bind failed: Error: 'ifmgr' detected the 'warning' condition 'Failed to
contact the server'
Dec 16 16:33:25.690 gether/0/main 0/RSP0/CPU0 3# t4 ETH_IM: ethernet_im_conn_open: Connecting
to IM
Dec 16 16:33:25.795 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: ethernet_im_conn_open: Registered
IM control handler
Dec 16 16:33:25.795 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: ethernet_im_conn_notify_handler:
Notify condition is 4096
Dec 16 16:33:25.801 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: Initialising connection to
NetIO
Dec 16 16:33:25.801 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: Binding to NetIO
Dec 16 16:33:25.819 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: Connection to NetIO succeeded
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
200 OL-30353-01
Tech-Support Commands
show tech-support ethernet

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English