Cisco XR 12000 User Manual

Dec 16 16:33:25.852 gether/0/main 0/RSP0/CPU0 1# t4 ETH_STATS: Stats collection initialized
Dec 16 16:33:25.852 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IIR: Initializing connection to
IIR
Dec 16 16:33:25.859 gether/0/main 0/RSP0/CPU0 1# t4 ETH_ERR: IIR connection failed, scheduled
for retry, bound=0, ERR: Error: No such file or directory
Dec 16 16:33:25.859 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IIR: Initialized connection to IIR
Dec 16 16:33:25.859 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: Port pre-enable for port=1
Dec 16 16:33:25.859 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: IM pre-create: sorted list of
2 interfaces
Dec 16 16:33:25.859 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: IM create: about to send batch
of 2 interfaces
Dec 16 16:33:33.194 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: IM create: sent batch of 2
interfaces, return: Success
Dec 16 16:33:33.194 gether/0/main 0/RSP0/CPU0 1# t4 DB: physical IDB added for
Mg0/RSP0/CPU0/0 (0x00000040)
Dec 16 16:33:33.196 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get BIA called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) MAC address 0024.f716.4b20
Dec 16 16:33:33.207 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Port Create called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) create event
Dec 16 16:33:33.207 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: Port post-enable for port=1
Dec 16 16:33:33.208 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get BIA called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) MAC address 0024.f716.4b21
Dec 16 16:33:33.208 gether/0/main 0/RSP0/CPU0 1# t4 DB: physical IDB added for
Mg0/RSP0/CPU0/1 (0x00000080)
Dec 16 16:33:33.208 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: ethernet_port_chkpt_recover:
checkpoint create succeeded: interface Mg0/RSP0/CPU0/1 (0x00000080), id 0x2fb8
Dec 16 16:33:33.208 gether/0/main 0/RSP0/CPU0 2# t4 ETH_TRACE: ethernet_enable_port:
Enabling the interface Mg0/RSP0/CPU0/1 (0x00000080)
Dec 16 16:33:33.218 gether/0/main 0/RSP0/CPU0 2# t4 ETH_SYSDB: ethernet_sysdb_edm_init:
Sysdb edm reg successful, node 1
Dec 16 16:33:33.222 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Port Create called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) create event
Dec 16 16:33:33.222 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: ethernet_enable_port: Interface
MgmtEth0_RSP0_CPU0_1 enabled
Dec 16 16:33:33.222 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: Port enabled ok for port=1
Dec 16 16:33:33.569 gether/0/main 0/RSP0/CPU0 1# t9 ETH_INFO: Client thread started
Dec 16 16:33:33.569 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: IM Owned Resource End processing
successful
Dec 16 16:33:33.570 gether/0/main 0/RSP0/CPU0 2# t4 ETH_IIR: Opening connection to IIR
Dec 16 16:33:33.571 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IIR: Successfully opened connection
to IIR
Dec 16 16:33:33.571 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IIR: 0 bundle member IDBs marked
as stale
Dec 16 16:33:45.875 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get MTU called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) MTU 1514
Dec 16 16:33:45.875 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: fwd_specify_plim_interface
call for interface Mg0/RSP0/CPU0/0 (bay 0, port 0, fwd port 0, ifh 0x40) delayed
Dec 16 16:33:45.937 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Loopback called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) Loopback type None
Dec 16 16:33:45.961 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Autoneg called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) Autoneg configured: speed not restricted,
duplex not restricted, flowcontrol not restricted
Dec 16 16:33:45.961 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Admin State called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) read state: disabled
Dec 16 16:33:45.963 gether/0/fast 0/RSP0/CPU0 2# t4 HW API: Get Operational MAC called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) MAC Address 0024.f716.4b20
Dec 16 16:33:46.051 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Duplex called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) Duplex type Half Duplex
Dec 16 16:33:46.052 gether/0/fast 0/RSP0/CPU0 2# t4 HW API Port Notification batch of size
1 for Port Available event processed successfully
Dec 16 16:33:46.052 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get MTU called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) MTU 1514
Dec 16 16:33:46.052 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: fwd_specify_plim_interface
call for interface Mg0/RSP0/CPU0/1 (bay 0, port 1, fwd port 1, ifh 0x80) delayed
Dec 16 16:33:46.052 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: Initial notification for
Mg0/RSP0/CPU0/1 (0x00000080) ok, (bay=0, port=1)
Dec 16 16:33:46.094 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Loopback called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) Loopback type None
Dec 16 16:33:46.094 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: ethernet_set_autonegotiation:
interface Mg0/RSP0/CPU0/1 (0x00000080) autoneg enabled
Dec 16 16:33:46.118 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Autoneg called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) Autoneg configured: speed not restricted,
duplex not restricted, flowcontrol not restricted
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 201
Tech-Support Commands
show tech-support ethernet

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English