EasyManuals Logo
Home>Cisco>Network Router>XR 12000

Cisco XR 12000 User Manual

Cisco XR 12000
428 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #210 background imageLoading...
Page #210 background image
Dec 16 16:33:46.118 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Admin State called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) read state: disabled
Dec 16 16:33:46.118 gether/0/fast 0/RSP0/CPU0 2# t4 HW API: Get Operational MAC called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) MAC Address 0024.f716.4b21
Dec 16 16:33:46.118 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: H/W replay successful for
Mg0/RSP0/CPU0/1 (0x00000080)
Dec 16 16:33:46.206 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Get Duplex called for
Mg0/RSP0/CPU0/1 (0x00000080) (bay=0, port=1) Duplex type Half Duplex
Dec 16 16:33:46.207 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: 6 attributes published
successfully for Mg0/RSP0/CPU0/1 (0x00000080)
Dec 16 16:33:46.207 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: Restoring config for
Mg0/RSP0/CPU0/1 (0x00000080), current state = Config not applied
Dec 16 16:33:46.207 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: Added Mg0/RSP0/CPU0/1
(0x00000080) to cfgmgr restore batch
Dec 16 16:33:46.216 gether/0/main 0/RSP0/CPU0 1# t4 ETH_INFO: Cfgmgr restore batch successful
for 2 interfaces
Dec 16 16:33:46.217 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IIR: IIR RESYNC_END notification
received
Dec 16 16:33:46.217 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IIR: 0 IIR stale flags cleared
Dec 16 16:33:46.217 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IIR: IIR RESYNC_END notification
processed ok
Dec 16 16:33:57.284 gether/0/main 0/RSP0/CPU0 1# t4 ETH_STATS: Stats type register callback
invoked, count=2
Dec 16 16:33:57.284 gether/0/main 0/RSP0/CPU0 1# t4 ETH_STATS: Private stats types
registered, type=10002, type=10003
Dec 16 16:34:06.221 gether/0/main 0/RSP0/CPU0 2# t4 ETH_STATS: New periodic block allocated,
ptr=0x50036994
Dec 16 16:34:32.828 gether/0/fast 0/RSP0/CPU0 1# t4 HW API Config Restore batch of size 2
processed successfully
Dec 16 16:34:32.828 gether/0/main 0/RSP0/CPU0 2# t4 ETH_INFO: Config restore completed ok
for Mg0/RSP0/CPU0/0 (0x00000040)
Dec 16 16:34:32.846 gether/0/main 0/RSP0/CPU0 3# t4 ETH_INFO: Starting cfgmgr restore
batch, size=0, rc=0x0
Dec 16 16:34:32.846 gether/0/main 0/RSP0/CPU0 1# t4 ETH_IM: IM_STATE_DOWN_IMM_ADMIN walk
completed for Mg0/RSP0/CPU0/1 (0x00000080)
Dec 16 16:34:32.916 gether/0/fast 0/RSP0/CPU0 1# t4 HW API: Port Enable called for
Mg0/RSP0/CPU0/0 (0x00000040) (bay=0, port=0) new state: enabled, hw link down
Dec 16 16:34:32.916 gether/0/main 0/RSP0/CPU0 1# t4 ETH_EVENTS: FSM action: Port admin
state enabled event for Mg0/RSP0/CPU0/0 (0x00000040); succeeded; link state: DOWN
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
202 OL-30353-01
Tech-Support Commands
show tech-support ethernet

Table of Contents

Other manuals for Cisco XR 12000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco XR 12000 and is the answer not in the manual?

Cisco XR 12000 Specifications

General IconGeneral
BrandCisco
ModelXR 12000
CategoryNetwork Router
LanguageEnglish

Related product manuals