Cisco XR 12000 User Manual

(Optional) Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk1: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
sent-to
Command Default
The command output is not compressed.
Command Modes
Administration EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
Use the show tech-support fabric command to run show commands that display information specific to
fabric debugging. This command generates fabric information that can be useful for Cisco Technical Support
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
204 OL-30353-01
Tech-Support Commands
show tech-support fabric

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English