Cisco XR 12000

representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service
Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.Note
The following show commands run automatically when you run the show tech-support fabric multicast
command:
•
show controllers fabric fgid stat all detail
•
show controllers fabric fgid info
•
show process fgid_allocator
•
show process fgid_aggregator
•
show process fgid_server
•
show process fgid_allocator
The following show commands run automatically when you run the show tech-support fabric traffic
command:
•
show controllers fabric plane all detail
•
show controllers fabric plane all stat brief
•
show controllers fabric plane all stat detail
•
show controllers fabric link port
•
show controller fabricq stat
•
show controllers fabricq queues
•
show controllers fabricq eio links all
•
show controller ingressq stat
•
show controller ingressq queue all
•
show controller ingressq fabric pla
•
show control ingressq block ssm bpmem 0
•
show controllers ingressq block fqm queue
•
show controllers ingressq vports all
•
show controllers ingressq interfaces all
•
show controllers ingressq eio links all
•
show controller fia rxslice all uq all channel all
•
show controllers cpuctrl devices ingressq pdma queue all act
•
show controllers cpuctrl devices egressq pdma queue all act
•
show controllers cpuctrl devices fabricq pdma queue all act
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 205
Tech-Support Commands
show tech-support fabric