Cisco XR 12000 User Manual

Examples
The following example shows some of the show tech-support routing ospf command output:
RP/0/0/CPU0:router# show tech-support routing ospf terminal page
-------------------------------------------------------------------------------
show tech-support ospf
-------------------------------------------------------------------------------
---------------------------------- show ospf ----------------------------------
Routing Process "ospf 100" with ID 10.1.1.1
Supports only single TOS(TOS0) routes
Supports opaque LSA
Initial SPF schedule delay 5000 msecs
Minimum hold time between two consecutive SPFs 10000 msecs
Maximum wait time between two consecutive SPFs 10000 msecs
Initial LSA throttle delay 500 msecs
Minimum hold time for LSA throttle 5000 msecs
Maximum wait time for LSA throttle 5000 msecs
Minimum LSA interval 5000 msecs. Minimum LSA arrival 1 secs
Flood pacing interval 33 msecs. Retransmission pacing interval 66 msecs
Maximum number of configured interfaces 255
Number of external LSA 0. Checksum Sum 00000000
Number of opaque AS LSA 0. Checksum Sum 00000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
External flood list length 0
Non-Stop Forwarding enabled
Area BACKBONE(0)
Number of interfaces in this area is 12
SPF algorithm executed 350 times
Number of LSA 31. Checksum Sum 0x10c978
Number of opaque link LSA 0. Checksum Sum 00000000
Number of DCbitless LSA 0
Number of indication LSA 0
Number of DoNotAge LSA 0
Flood list length 0
------------------------------ show ospf vrf all ------------------------------
------------------------------ show ospf summary ------------------------------
Number of OSPF interfaces 12
Number of OSPF interfaces up 12
Number of OSPF virtual interfaces up 0
Number of neighbors 9
Number of neighbors adjacent 9
Number of areas 1
LSA Type Count
Router : 13
Network : 11
Summary Net : 7
Summary ASBR : 0
Type-7 Ext : 0
Opaque Link : 0
Opaque Area : 0
Type-5 Ext : 0
Opaque AS : 0
-------------------------- show ospf vrf all summary --------------------------
----------------------------- show ospf interface -----------------------------
POS0/1/0/1 is up, line protocol is up
Internet Address 10.12.8.1/24, Area 0
Process ID 100, Router ID 10.1.1.1, Network Type POINT_TO_POINT, Cost: 1
Transmit Delay is 1 sec, State POINT_TO_POINT,
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 329
Tech-Support Commands
show tech-support routing ospf

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English