Cisco XR 12000 User Manual

Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Non-Stop Forwarding (NSF) enabled
Hello due in 00:00:08
Index 3/3, flood queue length 0
Next 0(0)/0(0)
Last flood scan length is 1, maximum is 19
Last flood scan time is 0 msec, maximum is 1 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.2.2.2
Suppress hello for 0 neighbor(s)
Multi-area interface Count is 0
GigabitEthernet0/1/5/1 is up, line protocol is up
Internet Address 10.14.8.1/24, Area 0
Process ID 100, Router ID 10.1.1.1, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State BDR, Priority 1
Designated Router (ID) 10.4.4.4, Interface address 10.14.8.4
Backup Designated router (ID) 10.1.1.1, Interface address 10.14.8.1
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Non-Stop Forwarding (NSF) enabled
Hello due in 00:00:05
Index 2/2, flood queue length 0
Next 0(0)/0(0)
Last flood scan length is 1, maximum is 4
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.4.4.4 (Designated Router)
Suppress hello for 0 neighbor(s)
Multi-area interface Count is 0
GigabitEthernet0/1/5/2 is up, line protocol is up
Internet Address 10.16.4.1/24, Area 0
Process ID 100, Router ID 10.1.1.1, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State BDR, Priority 1
Designated Router (ID) 10.6.6.6, Interface address 10.16.4.6
Backup Designated router (ID) 10.1.1.1, Interface address 10.16.4.1
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Non-Stop Forwarding (NSF) enabled
Hello due in 00:00:04
Index 4/4, flood queue length 0
Next 0(0)/0(0)
Last flood scan length is 1, maximum is 4
Last flood scan time is 0 msec, maximum is 1 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.6.6.6 (Designated Router)
Suppress hello for 0 neighbor(s)
Multi-area interface Count is 0
POS0/6/0/1 is up, line protocol is up
Internet Address 10.12.12.1/24, Area 0
Process ID 100, Router ID 10.1.1.1, Network Type POINT_TO_POINT, Cost: 1
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Non-Stop Forwarding (NSF) enabled
Hello due in 00:00:01
Index 8/8, flood queue length 0
Next 0(0)/0(0)
Last flood scan length is 1, maximum is 4
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.2.2.2
Suppress hello for 0 neighbor(s)
Multi-area interface Count is 0
.
.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
330 OL-30353-01
Tech-Support Commands
show tech-support routing ospf

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English