CITIZEN Android Label Print SDK — Programming Manual
1. Introduction
This document is a programming manual for the CITIZEN Android Label Print SDK.
1.1. Who should read this document
This document is intended for developers who integrate their Android application programs with Citizen
label printers.
1.2. System summary
This SDK is referred by Android application program to control Citizen Label printers.
System diagram of the SDK
Supported terminals
Below is a list of supported terminals for the SDK.
Android 2.3.3 (API Level 10) or newer
Android 3.1 (API Level 12) or newer
Wi-Fi, Bluetooth, USB Host
Direct thermal/Thermal transfer
Direct thermal/Thermal transfer
Wired/Wireless LAN, USB, Bluetooth
Direct thermal/Thermal transfer
Direct thermal/Thermal tranfer
Direct thermal/Thermal tranfer
Wired/Wireless LAN, USB, Bluetooth
CITIZEN Android Label Print SDK
Wi-Fi / Bluetooth /
USB Host