Chapter 1 Setup
19
4 Connection to a Computer
An interface cable is necessary to connect the printer to a computer.
To connect the cable, proceed as follows:
1. Turn OFF both power switches of the printer and the computer.
2. Connect the connector of one end of the interface cable to the interface
connector on the back of the printer and secure it with locks or locking screws.
3. Connect the connector of the other end of the interface cable to the interface
connector on the computer and secure it with locks or locking screws.
Parallel interface cable
4 Connection to a Compute
Serial interface cable
USB interface cable
To Next Page
Loading...
