Citizen CLP-7202e User Manual

Chapter 2 Printer Operation

25
3 Printer Configuration Setting Mode
In this menu, the print mode, the ‘after printing function’ such as cutting or peeling, media
sensor selection and print quality settings such as print speed or density are configured.
Control key functions are shown below. The printer configuration settings are stored in
memory so they are maintained even after the power is turned off.
Example: Changing the media gap sensor to the black mark sensor
1. First check the printer goes On Line, then press and hold down the PAUSE key and press the
FEED key.
2. Change the print mode (direct-thermal or thermal transfer printing) to the sensor selection
with the PAUSE key.
OnLine
OnLine
Pressing these keys simultaneously
places the printer into printer
configuration setting mode (menu).
Returns to normal
operating mode.
Selects the mode item.
Selects the mode.
OnLine
Transfer
Transfer
Edge
3 Printer Configuration Setting Mode

Citizen CLP-7202e Specifications

General

Brand	Citizen
Model	CLP-7202e
Category	Barcode Reader
Language	English