Chapter 2 Printer Operation
24
2 Normal Operating Mode
When the power is turned on, the printer enters the normal operating mode, which allows normal
printing. The control key functions are as follows:
OnLine
PAUSE key
Temporarily pauses printing. ‘Pause’ is displayed on the LCD screen. If pressed during
printing, printing will stop after the current label is printed. Press the PAUSE key again
to resume printing.
FEED key
Advance to the top of the next label. When using continuous media,
make sure the Sensor selection is set to ContinuP or a Media error will
result.
STOP key
With this key, the operator can stop and cancel the current
print job. Pressing the STOP key during printing stops the
printing immediately. Pressing it again cancels the print job.
2 Normal Operating Mode
To Next Page
Loading...
