Appendixes
67
User options
4. PCMCIA Memory Card
Card type
PCMCIA Type I flash memory card
Storing print format
files
Data in the field register area can be
stored and loaded
Storing graphic data
Graphic data such as a corporate
logo can be stored and recalled from
the PCMCIA memory card and
combined with field data and printed
Description
PCMCIA
memory card
applications
Storing downloaded
fonts
Downloaded HP Soft fonts can be
stored
Note: Some versions of this printer have flash memory installed on the main PCB as standard.
You may not need to use a PCMCIA card in this case. Please contact the dealer from where you
purchased the printer for further details.
Installation
1. Turn OFF the power switch of the printer.
2. Remove the PCMCIA memory card cover at the bottom of the printer (see figure).
3. Insert the memory card.
4. Replace the PCMCIA memory card cover.
• Before use, carefully read and understand the instructions regarding the PCMCIA memory
card.
• Do not insert or remove the PCMCIA memory card before the power to the printer is turned off.
• Always close the PCMCIA memory card cover to keep out foreign matter such as particles of
dust.
• If the PCMCIA memor
card write failure occurs, check it with the test command
STX.w
.
CAUTION
Insert the card with descriptions to the face side
1 Options
To Next Page
Loading...
