Appendixes
69
Item
Description
Bar code on-board may vary depending on the model and destination. See the
Command Reference for details
Bar codes
• CODE 3 of 9 • UPC-A • UPC-B • Interleaved 2 of 5
• CODE 128 • EAN13 • EAN8 • CASE CODE etc
Font and size on-board may vary depending on the model and destination. See
the Command Reference for details
Fonts
∗
• Fixed pitch font • OCR-A, B • CG Triumvirate, CG Triumvirate Bold
• TrueType rasterizer
Transparent-type
sensor
Detects media gap between labels, tag notch and
media out
Reflective-type
sensor
Detects reflective mark on back of media and media out
Ribbon end sensor Detects ribbon out and end (holder speed)
Label peeling sensor (optional)
Media detection
sensors
Media top position (home position) adjustable with software
Serial (RS-232C)
Parallel (IEEE1284 compatible and nibble modes)
Communication
interface
USB (USB1.1)
LEDs Power and Error
LCD Displays printer status, error contents, mode switch
contents etc
Control keys Pause, Feed and Stop
Mode switch Switches between direct-thermal and thermal-transfer
and sets parameters for communication etc
Head-up detection
sensor
Detects head open
Indications, keys
and switches
Power switch Turns on or off the power
Factory Installed Auto-Cutter or Label Peeler
Options
User Installed PCMCIA memory card
Height 251 mm 9.9 in
Width 255 mm 10.0 in
Depth 428 mm 16.9 in
Dimensions and
weight
Weight 11.0 kg 24.2 lbs
Voltage 120V system
120V -10%+6%, 2.5A, 60Hz
(USA and Canada)
Power
Voltage 220V system 220V - 240V -10%+6%, 1.2A, 50/60Hz (Europe)
∗ Note: UFST and TrueType rasterizer are licensed from Agfa Corporation. UFST is a trademark of
Agfa Corporation. TrueType is a trademark of Apple Computer.
2 specifications
To Next Page
Loading...
