Appendixes
77
Tear-Off Function
The tear-off function eliminates the waste of labels when tearing manually. It allows media to
automatically advance to the tear position after printing.
When this function is turned on, media will be fed to the manual tear position after printing. The
printer will feed back media to the start print position when the next print job is sent.
If data is transmitted continuously from the computer, the tear-off function will be suppressed to
increase throughput.
1. Turning Tear ON/OFF
Tear can be turned to ON or OFF from the control panel. Default is OFF.
Indications on the control panel are as follows
LCD screen
Tear-off invalid Tear-off valid
‘NoAction’ ‘TearBar’
2 Specifications
To Next Page
Loading...
