- 9 - 
2. DETAIL 
2.1 ESC/POS Command List 
2.1.1 CT-S280 
Print Control Commands 
・
・
FF 
Printing in PAGE MODE and returning to STANDARD MODE 
(at the selection of PAGE MODE) 
P    64 
Printing data in PAGE MODE 
Printing and feeding paper in minimum pitch 
・
Printing and feeding the paper by “n” lines 
・
Print Character Commands 
Canceling print data in PAGE MODE 
Setting the right spacing of the character 
・
Collectively specifying the printing mode 
・
Specifying/Canceling download character set 
・
Defining the download characters 
・
Specifying/canceling underline 
・
Deleting download characters 
・
Specifying/canceling emphasis printing 
・
Specifying/canceling double strike printing 
・
Selection of character fonts 
・
Selecting the international character set 
・
Specifying/canceling 90°-right-turned characters 
Selecting the character code table 
・
Specifying/canceling the inverted characters 
Specifies/cancels printing in red (black-based paper) 
・
Specifies/cancels printing in red (black-based paper) 
Specifying the character size 
・
Specifying/canceling the black/white inverted printing 
・
Specifying/canceling the smoothing 
・